|
Fuel System
|
 |
| 1) |
Check carburetor for proper operation |
| 2) |
Check for proper operation of choke |
| 3) |
Check for proper operation of fuel pet-cock |
| 4) |
Check for proper operation of fuel drain line |
| 5) |
Check for proper operation of gas tank vent |
| 6) |
Check and adjust idle set screw |
| 7) |
Adjust needle in necessary (high altitude) |
|
Electrical
|
| 8) |
Install and check battery - fill with electrolyte if battery is not a sealed unit |
| 9) |
Check fuses |
| 10) |
Check all lights |
| 11) |
Check ignition |
| 12) |
Ensure proper operation of starter |
| 13) |
Check that spark plug wire is properly installed |
|
Engine
|
| 14) |
Check oil for proper level and quality |
| 15) |
Check cooling system for anti-freeze (only on water cooled units) |
|
Suspension
|
| 16) |
Check wheel bearings |
| 17) |
Check and adjust suspension components |
| 18) |
Check and adjust tire pressure |
| 19) |
Check and adjust brakes |
|
Other
|
| 20) |
Check all plastic for damage |
| 21) |
Check and adjust throttle cable |
| 22) |
Check foot-rests |
| 23) |
Test all hand and foot controls for proper operation |
| 24) |
Check and adjust (and lubricate) chain if necessary |
| 25) |
Check transaxle fluid level |
